Used Wood finishing machine

530 table width and 2800 mm plate length with a 4-blade hss axis, and a 5.5 hp motor and 380 v voltage Location : EUROPE (Western and Northern)

Price : On request

Brand : SUPA 200 tables wide, and 1100 mm long of plates with je of 4 blades of 3 hp, at 380 v voltage, wi Location : EUROPE (Western and Northern)

Price : On request

400 mm wide table and 2,200 mm long, with 4 hp power and 380 v voltage, 3-blade hss axis, new machine, CE re Location : EUROPE (Western and Northern)

Price : On request

Brand : MISIL 50 mm milling machine. axis, square, with 1215 regulations Machine to review, painted. 5.5 CV Location : EUROPE (Western and Northern)

Price : On request

Brand : SIMUN Square, with 50 mm. of axle, with a trolley to glean with a pneumatic clamp and prepared to co Location : EUROPE (Western and Northern)

Price : On request

50 axis, cast iron with 5.5 HP. power at 380 V. voltage Slotted tables and prepared to put drag feeder Without Location : EUROPE (Western and Northern)

Price : On request

Without CE. 50mm shaft. diameter, 180 mm. high, prepared for 1215. With a 5.5 HP engine. and voltage to 380 V Location : EUROPE (Western and Northern)

Price : On request

Of three bands, roller, skating roller for wood or veneer, two 15 hp motors. power at 380 v. voltage. Machin Location : EUROPE (Western and Northern)

Price : On request

Single-band, wood roller, S.C.M. 900 mm hydraulic table, rise and fall. Drag mat, 10 hp motor power, at 380 v. Location : EUROPE (Western and Northern)

Price : On request

Brand : LEGNA 200 mm. table width, upper sandpaper, pneumatic tensioning, lower drag with strap. 3 hp motor Location : EUROPE (Western and Northern)

Price : On request

Composed of two 140 mm rollers. diameter for wood and veneer, especially to calibrate. A 7.5 hp engine. elect Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

With a combination of brush, thicknesser, saw and drill The machine has a power of 3CV, a voltage of 220 V The Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

With useful measurements of 2500mm by 120mm The machine has a composition of incisor, grinder and router With Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

Complete line of Barberan varnishing, 1300 mm wide Composed of transfer, inks and spatulars, curtain, lamps, Location : EUROPE (Western and Northern)

Price : On request

Shaft 50 mm. Casting table, like the rest of the machine. With 3 roller feeder. 5.5 hp engine. 3 motor speeds Location : EUROPE (Western and Northern)

Price : On request

6 HP 220 V 3 Phase Air Requirements: 90 PSI Floor Space Required: 2’6” wide x 4’ deep Driv Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Motor Power 1,11 Kw Voltage 380 Transport Tapete 1200 mm Pump Yes Blades (applicator and dispens Yes Work Year(s) : 1993 Location : EUROPE (Western and Northern)

Price : On request

Motor Power 3Kw Voltage 220 C.E. Yes Transport Tapete 1100 mm Independent dosing roller (qua Yes Pump Ye Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

Motor Power 0,75 Kw Voltage 380 C.E. Yes Transport Tapete Independent dosing roller (qua Yes Working widt Location : EUROPE (Western and Northern)

Price : On request

With measures of 1800 mm of table. The machine has a power of 10 CV, a voltage of 380V. The machine has 4 ax Location : EUROPE (Western and Northern)

Price : On request