Used Wood finishing machine
9,844 resultsSubcategories
Automatic cold press for panels, polyurethane foam, industrial shed doors, perimeter walls, foamed panels, in Location : EUROPE (Western and Northern)
Price : On request
More detailsSells in lot wood machine, good condition and very secure. Free at the beginning of September. Description of Location : EUROPE (Western and Northern)
Price : On request
More detailsChain milling machine - Max. stitch depth : 150 mm - Max stitch length : 300 mm - Longitudinal adjustment mill Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More details4-axis four-sided planer - Flat shaft, motor 7.5 HP/5.5 kW - braked - Right and left spindle, tool diameter mi Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsProfile grinder Motor power: 1.1 kW Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible Year(s) : 1991 Location : EUROPE (Western and Northern)
Price : On request
More detailsLine hole drilling machine Motor power: 1.5 kW Motor speed: 2800 rpm 1 drilling beam with 26 spindles, center Location : EUROPE (Western and Northern)
Price : On request
More detailsEdge Banding Machine Control: PLC CONTROL Spraying device (Solvent): OK Pre milling: OK Snipping unit: OK Year(s) : 2008 Location : MIDDLE EAST
Price : On request
More detailsFour side planer planning width 860 mm planning height horizontal 170 mm planning height vertical 100 mm with Location : EUROPE (Western and Northern)
Price : On request
More detailsLocation : AMERICA North (USA-Canada-Mexico)
Price : On request
More details250 V 30 A 3 Phase Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details3 Phase 400 V Year(s) : 2014 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsShaper 1 HP 220 V 3.4/2.5 A 2/4 Pole 60 Hz 3 Phase 3400/1720 Rpm 1 1/4″ spindle Four speeds 3000, 4500, 6000 a Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsTable area 36-1/2″ x 48″ (930 x 1220mm) 7.5 hp motor 8.5 A 600 V Interchangeable spindles : 1″, 1-1/4″, 1-3/8″ Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsModel No. 4512 Shaper Motor: (2) 10 HP Himmel Direct Drive Shaper Spindle: 1-1/4″ Mandrel, 5″ Stack Height Com Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsEdgebanding capacity: 0.3 – 3 mm (0.012 – 0.118″), in coil and up to 12 mm (0.47″) strips. Panel thickness min Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsDowel Inserter 220 V 11.5A 60 Hz Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsDrill 220 V 6 Amps 2 HP Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBoring Machine 220 V 2.5 HP 60 Hz 3 Phase 8 A Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsEdgebander 230 V 60 Hz 20 Amps Top and Bottom Trimmers End Trimmers Buffing Year(s) : 2009 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details5 HP 208-230/460 V 3 Phase 1725 RPM 60 Hz Frame: 184T Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsEdgesander 2 HP 3 Phase 60 Cycles 208/460 V 1720 RPM Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsCNC Dowel Inserter 220 VAC 3 Phase 12 Amps 60 Hz Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsThe Model 313 Features An Automatic Cycle With Dowel Drilling For Accurate Alignment Of Mitered Corners. Highl Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsShaper 5 Speeds : 2,800, 4,500, 6,000, 8,000, 10,000. 3 Phase Voltage 230-460V Year(s) : 1990 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsPurchased in 2000 2 heads 37 x 60 belts 575 volt Runs well Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsYou can find used Wood finishing machine on Wotol
For second hand Wood finishing machine we have Planer / Shaper / Moulder, Sander / Polisher, Grinders, Gluing machines, Press, Drilling & Boring machines, Bonders, Sprayer / Coater, Laminator.
The main manufacturers for used Wood finishing machine are SCM, Weinig, Brandt, Homag, Wadkin, Biesse, Holzher, Ima, OTT, Casadei, Viet, Vitap, Heesemann.
The main models are Olimpic Series, S52, Compact Series, FORMULA Series, SUPERSET Series, T120C, UNIMAT Series, Rondamat Series, Profimat Series, POWERMAT Series, Optimat Series, KDN60, KDF Series, Kal 210 Ambition 2260, AKRON Series, ARTECH F 39 N, Stream B1, NV300, TD630, T630, Sprint Series, ACCURA Series, Pacific Series, RSK-O 110.