Used Warper (Sectional)
172 resultsWorking height 3200mm 1000mm diameter Machinery in operation. Year(s) : 1994 Location : EUROPE (Western and Northern)
Price : On request
More detailsWidth 250 cm, with 2 creels of 512 spindles each, gauge = 270 x 270 With 1 set of trolley per creel Year(s) : 1998 Location : EUROPE (Western and Northern)
Price : On request
More detailsSectional Warper width 2250 mm. sizing device. without creel. Year(s) : 2002 Location : EUROPE (Western and Northern)
Price : On request
More details1x sectional warping machine BENNINGER mod. SUPERTRONIC – yoc 1996 for warp beam max diam 1000 mm parallel BE Year(s) : 1996 Location : EUROPE (Western and Northern)
Price : On request
More details1 x TAIANA sectional warper "400/2.5" width 360cm year 2013 1 x TAIANA creel with 480 bobbins (8x30x2), gauge Year(s) : 2013 Location : EUROPE (Western and Northern)
Price : On request
More detailsCOMSAT SECTIONAL WARPER DOUBLE WAXING DEVICE SINGLE UNLOADED ELECTRONIC CREEL, 320 BOBBINS, YOC 2000 ELTEX Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More detailsSECTIONAL WARPER W:2200 DOUBLE WAXING DEVICE SINGLE UNLOADED 1x GAMATEX FIXED CREEL, 336 BOBBINS, YOC 1994 Year(s) : 1994 Location : EUROPE (Western and Northern)
Price : On request
More detailsBENNINGER sectional warper BENMATIC working width 2200 mm cone 1:8 / 1450 leasing reed Bensplit beaming unit f Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsBenninger Sectional Warper With Automatic Rewinding. With 800 Positions Creel. This sectional warper gives yo Year(s) : 1993 Location : AMERICA (Central and South)
Price : On request
More detailsWaxing Beam diameter 800 mm Machine can Work with robot NO creel Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More details1x BENNINGER SECTIONAL WARPER “BEN-MATIC” W:2200 YOC 1999 BENNINGER CREEL “GFP”, 360 POSITIONS, GAUGE 20CM, YO Year(s) : 1999 Location : EUROPE (Western and Northern)
Price : On request
More detailsTAIANA SECTIONAL WARPER "400/2.5-2000" W:2000 YOC 2006 TAIANA CREEL "TF80 PAFC", 720 POSITIONS, GAUGE 20CM, YO Year(s) : 2006 Location : EUROPE (Western and Northern)
Price : On request
More detailsSECTIONAL WARPER W:2200 CREEL 288 POSITIONS Year(s) : 2002 Location : EUROPE (Western and Northern)
Price : On request
More detailsWarping Machine with Creel Working With 260 cm Creel: 320 Bobin position. Machine was in operation in a texti Year(s) : 1987 Location : EUROPE (Western and Northern)
Price : On request
More detailsSectional Warper width 2200 mm. eam flange dia.1000 mm. Year(s) : 1988 Location : EUROPE (Western and Northern)
Price : On request
More detailssectional warping machine 360 cm wide capacity of the clear or window is 500 bobbin Year(s) : 2004 Location : EUROPE (Central and Eastern)
Price : On request
More details83" on flat 52" on neck, with programmable control hack reed stand, tensioning rools doffing section 39" diam Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details93" on flat 40" on neck, with control, hack reed stand model USK1 OOBM doffing section 36" diam. max loom beam Year(s) : 1986 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsEach creel with 220 cm width and double creel 600 bobbin capacity Year(s) : 1995 Location : MIDDLE EAST
Price : On request
More detailsSECTIONAL WARPING DRUM WIDTH 5200 MM BEAMING WIDTH : 4200 MM NOS OF CREEL : 1400 NOS X 2 (BOTH SIDE) = 2800 C Year(s) : 2002 Location : ASIA (North East)
Price : On request
More detailsSectional warping machine. Working width between flanges : 3000 mm Maximum beam diameter: 1000 mm Max section Year(s) : 1989 Location : EUROPE (Central and Eastern)
Price : On request
More detailsSECTIONAL WARPER WITH BENNINGER FIXED CREEL "BEN-CREEL" YOC 1998 - 800 BOBBINS (400+400) - GAUGE 27CM - 5 TRO Year(s) : 1998 Location : EUROPE (Western and Northern)
Price : On request
More detailsSECTIONAL WARPER WITH TAIANA FIXED CREEL YOC 1993 - 800 BOBBINS (400+400) - GAUGE 27CM - 5 TROLLEYS Year(s) : 1993 Location : EUROPE (Western and Northern)
Price : On request
More detailsKarl Mayer sectional warper, type BOM, year 2000. It comes with "S" roller, camera system, waxing device, spa Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details1 BENNINGER sectional warper BEN-TRONIC of year 2000 Max beam dia 1000 Cone ratio 1:8 Pressure roller Waxing s Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More detailsYou can find used Warper (Sectional) on Wotol
Used sectional warper in Wotol
Sectional warpers are used to prepare the beams for the weaving.
It is composed of a creel holding bobbins of yarn, a drum on which the yarn will be rolled and finally a beaming section to unroll the drum on the finbal weving beam.
This creel if holding few hundreds to more than 1000 bobbines of yarn.
All the yarns will be pulled from the creel to the drum.
If there are 700 bobbins on the creel they will be rolled buy group of 700.
Once the wanted lenght of warp is reached the drum will stop and and other line of 700 yarns will be rolled next to the previous one and so on.
If you want a beam with 7000 yarns you will need to repeat this action 10 times.
Once you the number of desired yarns on the width of the drum has been reached, the drum will stop.
Q: What tension is usually necessary on a section warper?
A: For warping beams used in non technical fabric the wrapers have a tentions with a range of 0,2 to 10 KN but if you need to warp beams for technical fabric you will need 15KN or even 20KN is some cases. For such tension you need reinforced sectional warper.