Used Sheet Metal Machines

INHER EL 1000 Machine to form the sheet metal tube and carry out the stitching Forms the tube from the flat s Location : EUROPE (Western and Northern)

Price : On request

Press force 80 ton Bed area right to left 36 in Stroke 7 in Max shut height to bed 20 in Ram adjustment 4 in B Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Press force 121 ton Bed area right to left 43 in Stroke 4.3 in Condition Very good Single point gap frame pres Year(s) : 1988 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Bed area right to left 78.7 in Stroke 7.85 in Condition Very good Gap frame double crank press Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Maximum Thickness: 3/16" Pre-Bending Thickness: 5/32" Bending Length: 80" Roll Diameter: 5.5" Bending Speed: 2 Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Press force: 220 T Bed L-R: 49.2 in Bed F-B: 33.1 in Slide area L-R: 39.4 in Slide area F-B: 25.6 in Stroke: 9 Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Press force: 165 T Bed L-R: 57.9 in Bed F-B: 33.1 in Slide area L-R: 36.6 in Slide area F-B: 25.6 in Stroke: 9 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Press force: 165 T Blanking capacity: 132 T Bed L-R: 46 in Bed F-B: 29.9 in Slide area L-R: 27.5 in Slide area Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Coil inside diameter: 20–24 in Coil outside diameter: 72 in max Coil maximum width: 40 in Coil maximum thickne Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Max width: 64 in Servo feeder Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Press force: 2000 ton Type: Link drive press Die space: 312 in x 84 in Stroke: 30 in BDC: 0.5 in Speed: 10-20 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Max sheet thickness 2 mm steel Manual bending cycle Automatic bending cycle Bending angle adjustable via poten Year(s) : 1993 Location : EUROPE (Western and Northern)

Price : On request

Max sheet thickness 5 mm steel Stroke of upper beam 350 mm Manual mode Automatic mode Motorized back gauge wit Location : EUROPE (Western and Northern)

Price : On request

165 ton Bed area right to left 78.7" Stroke 7.85" Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Bed area right to left 94.5" Stroke 9.85" Year(s) : 1991 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

220 ton Bed area right to left 94.5" Stroke 9.85" Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Suitable for cold rolling of fine-grained steel Suitable for cold rolling of stainless steel Suitable for cold Location : EUROPE (Western and Northern)

Price : On request

4 rolls Roll capacity cold 3100 x 40 mm Roll dia upside 450 mm Dia under roll - side rolls 350 mm Power needed Location : EUROPE (Western and Northern)

Price : On request

3 rolls Roll capacity cold 2500 x 30 mm Roll dia upside 450 mm Power needed 25 HP Hydraulic bending roll 3 rol Location : EUROPE (Western and Northern)

Price : On request

120 Tonnage Stroke: 3" Shut Height: 18" Bed Width: 30" Bed Length: 30" Strokes Per Minute: 90 SPM Motor Power: Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Stroke: 2" Shut Height: 14.5" Bed Width: 24" Bed Length: 15" Strokes Per Minute: 140 SPM Motor Power: 3 HP Air Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Capacity: 75 Tons Stroke Length: 2" - 18" (adjustable) Daylight: 30" Closed Height: 12" Slide Area: 84" x 48" Year(s) : 2001 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Press force: 100 t Overhang: 330 mm Stroke: 10-130 mm Stroke rate: 56 strokes/min Ram adjustment: 80 mm Table Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

Capacity: 3100 x 6 mm Electrically adjustable backgauge Cutting gap adjustment Cutting angle adjustment Pneuma Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

Number of rolls: 4 Roll capacity cold: 3040 x 6 mm Upper roll diameter: 220 mm Lower/side roll diameter: 176 m Location : EUROPE (Western and Northern)

Price : On request