Used Screw Extruders

Model 250 24:1 NVLH Screw Size 2.5" Voltage 460 Volt 3 Phase 60 Hz Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 2" Gear Ratio 6.53:1 Voltage 460 Volt 3 Phase 60 Hz Year(s) : 1989 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 3.5" Motor 75 HP Gear Ratio 17.43:1 Voltage 460 Volt 3 Phase 60 Hz Year(s) : 1971 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Co-Rotating Twin Screw Extruder Screw Size 102mm L/D Ratio 24:1 Vented Yes Water Cooled Yes Barrel Section Year(s) : 1996, 2003 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

EXTRUSIONE LINE PREALPINA CDM throughput rate 500-700 kg Installed power 435 kw (about 280 kw used in work) Location : EUROPE (Western and Northern)

Price : On request

Brand Gloucester Screw Size 4.5" L/D Ratio 30:1 Cooling Water Cooled Motor 200 HP DC # of Barrel Zones 5 # of Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Diameter 3.5″ L/D Ratio 30:1 Barrel Zones 5 HP Capacity 430 HP Type of Cooling Water Cooled Electrics 48 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5" extruder with 6" die 17.2:1 gear box ratio Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5" American Kuhne 30:1 L/D lowboy extruder Has electrically heated and air cooled barrel Driven by a 125 HP Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.25 24/1 L/D Davis Standard pedestal mounted extruder. Driven by a 5 hp DC motor and scr drive. Includes Location : AMERICA North (USA-Canada-Mexico)

Price : On request

50mm Leistritz Model ZSE50GG counter rotating twin screw extruder. Driven by 46kw AC motor 2200 rpm, 460 vol Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model:ME45 3 x 25D 45mm (1.77 inches) 4 heating Zones 2 tool Zone,4 Air cooled fans. Motor:14 Kw(18.77 HP) V Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3" Merritt Davis Extruder Year estimate:1980 Hp:60 hp Air cooled. Centerline of barrel is 43" from the floor Year(s) : 1980 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4.5" Davis Standard cold feed rubber extruder new 2003. Has a 20/1 L/D, vented/plugged barrel, electrically Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Single screw extruder Type: Elipse C40-26DL Year(s) : 2011 Location : EUROPE (Western and Northern)

Price : On request

Regranulation line with 105 mm. screw 35 L/D Feeding hopper Vacuum degassing pump 4 kw Ceramic heaters D.c. AB Location : EUROPE (Western and Northern)

Price : On request

The Extruder is still running in production. Connection power: 127 kW Operating voltage: 415v Frequency: 50Hz Year(s) : 2011 Location : OCEANIA

Price : On request

The Extruder is still running in production. Operating voltage: 3X415v Frequency: 50Hz Set motor power: 47 kW Year(s) : 2007 Location : OCEANIA

Price : On request

Operating voltage: 415v Frequency: 50Hz Control voltage: 230/24v Weight: 3400kg Special Note: Requires new mot Year(s) : 2008 Location : OCEANIA

Price : On request

Coextruder for PE/PP pipes Type: MIZAR 25LD24 Fully overhauled: new heaters and thermocouples new stainless Year(s) : 2012 Location : EUROPE (Western and Northern)

Price : On request