Used Extrusion / Pelletizer and Others

Vacuum-Calibration table Cincinnati-Greiner CAL-MOD 2P/3,5 Clamping frame length: 3.500 mm 2 vacuum pum Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

Vacuum-Calibration table Clamping frame length: 6.500 mm 2 vacuum pumps (4.6 kW each) 20 vacuum connections 1 Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Main Feeder Main Feeder Type Single Screw on First Barrel Feeder Type Granular Capacity 100-800 kg/h Inverter Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Horsepower 2 HP Voltage 230V / 1 Phase Comes With Additional Rotary Helical Gear Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Stretch Film Line For the production of LLDPE stretch films. 200-600mm reel diameter range 15-23micron thickn Year(s) : 2004 Location : EUROPE (Western and Northern)

Price : On request

1800mm web width 80mm extruder 1/30 BDO 80mm filter exchanger 300mm diameter head ASR 3 cooling ring (250-500m Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

14" Wide Cumberland 14 Pelletizer 24 Knife Bolt On Rotor 15 HP Westinghouse AC Motor, 230/460 70" In-Feed Heig Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Extruder Brand PTI Model Apex Series Year of Mfg 2002 Screw Size 4.5" Barrel Vented and Two Stage Screw Cooli Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Extruder Brand Polytruder Year of Mfg 2012 Screw Size 6" Cooling Air Cooled L/D Ratio 42:1 Motor 500 HP DC Ge Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

41" solid roll twin seal bag machine nichrome wire sealing two parallel seals with flying knife cut between ma Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Brand ZHOU spare sealing knife included zipper unwinder included scrap rewinder included the machine is power Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Includes spin dryer Model 8.1BF, die plate with cutter assembly, operator control, and 40 GPM water temperin Location : AMERICA North (USA-Canada-Mexico)

Price : On request

# of Strands 16 Rotor Size 3.5" Knives 6 Motor HP 7.5 Pelletizer Drive 300 HP Reliance Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Balloon Extruder 75mm With 75 HP Engine With cylinder and thread in perfect condition For High and Low 175mm Location : AMERICA (Central and South)

Price : On request

6" Extruder, Model 6.0 30D, 30:1 L/D, Air-Cooled, Vented and Plugged, 6 Barrel Zones, 9 Die Zones, Direct Dr Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Tank Size Length 122" Width 10" Height 10" Voltage 460V / 3 Phase / 60 Hz Amps 30 Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Tank Size 120 ", wide:10" Height: 10 " Voltage 460V / 3 Phase / 60 Hz Amps 15 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

60" gloucester 418 H in line bottom seal bag machine. Approximately 1990 vintage Year(s) : 1990 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Auxiliary spray cooling tank with indexing capability for passing lumber under. Additional cooling nozzles pe Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Machine has a 36 knife helical style rotor and a 5HP 180-Volt DC motor with silicon controlled rectifier cont Year(s) : 1988 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

stainless steel 2 stage spray tank 10′ long x 2′ wide x 2′ deep 10″ pipe, 2 stage spray tank Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Profile puller. 480-volt input. Touch pad controls. 2 belts with 6″ x 56″ long contact area. Each belt pow Year(s) : 2001 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Meltblown non-woven material with over 99% filtration efficiency, perfect for HEPA filters and other specializ Location : EUROPE (Western and Northern)

Price : On request

Extruder Brand Davis Standard Screw Size 6" L/D Ratio 30:1 Feed Screw Two-Stage (replaced in 2012) Motor 250 Location : AMERICA North (USA-Canada-Mexico)

Price : On request