Weima WL 4

The Weima high-performance shredders with their flexible application options
Can be used with all types of wood materials (hardwood, softwood, chipboard, MDF
Materials, plywood, veneer scraps, etc.) into fuel chips and achieve an enormous volume reduction with bulky materials materials.

Functionality :
The machine is equipped with a large filling hopper and can be used using a conveyor belt or can be fed by hand.
This funnel can do that can be adapted to individual needs and guarantees continuous
and cost-effective material feeding without requiring manual assistance must be taken.

The hydraulically controlled pusher guides the wood waste to be shredded
Cutting area of the rotor and becomes automatic and load-dependent controlled.
The internal slide guides are made of highly abrasion-resistant Plastic (polyamide) and can be adjusted.
The hydraulic cylinders are suspended on gimbals to exert lateral forces on the piston sleeves avoid.

The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works with a rotor speed of 80 - 120 rpm.
The concave ground, aggressive and 4-way rotating knives/cutting turning crowns are located in milled knife pockets on special knife carriers.
This patented system guarantees that this is possible for the first time
Reduction of the cutting gap between counter knife and rotor, high
Throughput performance, low energy consumption and optimal discharge of the shredded material.

The sieve mounted under the rotor determines the chip size (10 - 100 mm).
A sieve basket that can be opened hydraulically is also available upon request.

The power is transmitted from the electric motors via V-belts heavily dimensioned gearbox, which is located on one side of the rotor
Shaft stub is attached.

Technical data WL 4 / 18.5 kW:
Feed opening: 600 x 800 mm
Standard funnel content: 0.6 m³
Rotor working width: 600 mm
Rotor diameter: 252 mm
Power: 18.5 kW
Rotor speed: approx. 90 rpm
Paint finish: Weima standard
RAL 2002/7016
Connection value: 400 V +/- 5% / 50 Hz
Weight: approx. 1,300 k

included:
Electrical control (Moeller/Siemens/Allen-Bradley)
Control cabinet (Rittal / Sarell) concavely ground cutting turning crowns (40 x 40 mm)
Sern triangle approach
Vibration-damping foundation
V-rotor (patented) with knife pockets milled into the profile