Used Single Screw Extruders

1.75" Polytruder Single Screw Extruder 24:1 L/D Ratio, Air Cooled Barrel 16.2:1 L/D Gearbox Ratio, Belt Driven Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5" Polytruder, Single Screw Extruder, 24:1 L/D 17:1 Gearbox Ratio, Air-Cooled Barrel, 5 Barrel Zones 40 HP M Location : AMERICA North (USA-Canada-Mexico)

Price : On request

30:1 L/D electrically heated water cooled 6 zone vented barrel with screw and clamp. No motor. 42″ center l Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- an Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5″ 32:1 extruder having an electrically heated, air cooled, and non-vented barrel at approximately a 65″ c Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Motor 150 HP Drive 150 HP L/D 32:1 Cooling Water Cooled Screen Changer Included Water Bath Included Air Knife Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 20mm L/D Ratio 40:1 Maximum Screw Torque 80 Nm x 40 Nm Per Screw Maximum Screw Speed 1,200 Min-1 Ma Year(s) : 2023 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, n Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3/4" Extruder 20:1 L/D Ratio 1 HP Baldor DC Motor With DC Drive Cal 9400 Temperature Controllers 2 Barrel Zon Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Diameter: 120 mm L/D Ratio: 30:1 Motor: 200 HP Temperature Control Panel Year(s) : 1900 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model: AK 120MM 30:1 Rebuild Screw Size: 120 mm L/D Ratio: 30:1 Motor: 200 HP Digital Controls 42″ Centerline Year(s) : 2013 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.5" Davis Standard Mark IV Extruder 24:1 L/D Ratio, Air-Cooled Barrel Belt Driven Through 17.03:1 35IN35 Gear Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 4.5" L/D Ratio 34:1 Air Cooled Yes, 250 HP AC Vented Vented Barrel Vent Located Approx. 110" From C Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Type Screw Single screw Working hours 58.668 H Screw diameter 75 mm L/D ratio 30 Connection Load 180 kW Dimens Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

Type Screw Single screw Working hours 76.200 H Screw diameter 75 mm L/D ratio 30 Connection Load 186 kW Dimens Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

Barrel: vented, air cooled Belt driven by a 300 hp DC motor to a Davis Standard gearbox supplying 100 rpm scr Location : AMERICA North (USA-Canada-Mexico)

Price : On request

SIZE 4.5 in HORSEPOWER 100 TYPE Single Screw – Watts Per Heat Zome – 10,000 – Heater Elements Rated 460v in Se Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Diameter 45 L/D 30 Installed Power 145 kW Working Hours 27970 Year(s) : 2005 Location : EUROPE (Western and Northern)

Price : On request

3 Hp Motor Air Cooled 24:1 L/D, 125 RPM 14:1 Gearbox Ratio On Stand Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1" Merrit Davis Extruder,24:1 L/D 3 Hp AC Motor, Air Cooled, 125 RPM, 14:1 Gearbox Ratio On Stand With Tilt an Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1" Extruder On Stand , Air Cooled 3 Hp Ac Motor Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Make Jennings Tonnage 50 Ton Stroke 36" Fan Die Size 14" Max Pressure 1480 PSI Parker Hydraulic Pump 5.1 GPM E Year(s) : 2021 Location : AMERICA North (USA-Canada-Mexico)

Price : On request