EBA 551

Hydraulic reams cutter (blade descent and hydraulic tamper) with 550 mm cutting width.
The activation of two manual levers for the descent of the tamper and from the blade guarantee maximum operator safety.
Safety cover on the front and rear of the machine, low voltage operating controls (24 V according to regulations),
automatic blade return, disc brake for immediate blade stop, general switch and safety key switch, blade replacement device by working safely.
The photocells allow total coverage of the work area allowing the cutting function
only when the area is completely free. In addition to the automatic descent of the tamper,
it is also equipped with a practical mechanical pedal to activate the descent of the tamper and check the exact cutting point.
The machine is CE marked and GS certified. Comply with the latest safety regulations.
Hydraulic tamper (min. 200 / max. 1100 daN) and advancement of the rear square electrically controlled via the keypad.
Recording of cutting programs allowing you not to have to enter the necessary measurements
for cutting each time (up to 15 consecutive different measurements make up a cutting program).
The micro-adjustment of the length of the cut is also allowed for infinitely small variations
by the knob connected to the electro-mechanical system positioned on the front of the machine.
Solid German steel blade with adjustable stroke height from the outside.
Rigid metal structure to support the machine.

TECHNICAL SPECIFICATIONS:
Cuttingwidth550 mm
Maximum rear depth 570 mm
Maximum cutting thickness 95 mm
Minimum cut 32 mm
Power supply 220 V
Dimensions (L × W × H) 137 × 107 × 140 cm
Weight 369 Kg